COMPprint acoustic for ship fit-out – individual design with sound absorbing characterisitcs
In the last few years, COMP+ aluminium sandwich panels have successfully been established in the market. Especially for cruise liner and ship fit-out as well as interior fit-out, the light and dimensionally stable elements that offer a wide range of high-quality surfaces are strongly demanded.
Besides COMPwood (real wood veneer panels) and COMPlacq (homogeneous, varnished surfaces), COMPprint enlarges the range of individual designs in ceiling and wall solutions thanks to modern digital printing processes.
The optical characterisations of the different surfaces are not affected because of the specific micro-perforation with a diameter up to 0.7 mm. It also optimises the room's acoustical properties significantly. If required, further sound absorbing material can be added which will, again, improve the acoustic effect. Even with arched shapes or rather COMP+ as column cladding, the stability of the panels and the three-layered composition remain entirely intact.
COMP+ wall and ceiling panels can be installed on any standardised substructure. All single components are certified and bear the Wheel mark. The sound absorption values of COMP+ acoustic products have been tested in accordance to ISO 354 and ASTM C 423. Appropriate documents are available on request.
All COMP+ products are entirely manufactured in Lindner production facilities in Arnstorf in Lower Bavaria or in Madunice, Slovakia.
For more information, please click » here.