Products|Floors|Hollow floors|Calcium sulphate panels|FLOOR and more^® comfort

FLOOR and more^® comfort

Dry hollow floor with underfloor heating

FLOOR and more^® comfort

Dry hollow floor with underfloor heating

FLOOR and more® comfort creates a pleasant and liveable environment for the occupier. Intelligent heating and cooling systems incorporated into the floor panels regulate the interior climate perfectly – both in summer and winter. The system offers integrated, high-performance under floor heating with good heat reflection.

In addition FLOOR and more® comfort generally operates with a low flow temperature thus saving energy - simple, efficient yet ensuring a comfortable living and working environment. Architects can also enjoy more design freedom: radiators are unnecessary, extending the planners’ scope when designing the interior layout for foyers and premium quality office space. FLOOR and more® comfort can also be installed at an impressively low floor height and is especially lightweight.

quick reaction period with heating and cooling
nearly all covering types possible
heating performance 66 W/m² - 76 W/m² and cooling performance 33 W/m² - 40 W/m²
environmental-friendly due to low flow temperature

Data Sheet

FLOOR and more® comfortConstruction

FLOOR and more® comfortApplication

FLOOR and more® comfortApplication

PedestalsOverview over pedestals

Downloads

Product Information

Dimensions

Fire protection

Building Material Class

Fire Protection

of the carrier panel

Building Material Class

DIN EN 13501-1

Building Material Class

DIN 4102-1

Building Authority Designation

DIN EN 13501-1 Designation by building authorities

non-combustible

Building Authority Designation

DIN 4102-1 Designation by building authorities

non-combustible

Fire Resistance

DIN 4102-2

F 30 possible with additional measures

Fire Resistance

DIN EN 13501-2

B2 Flure in Büroflächen, Hotels, Altenheime, Behandlungsräume

Climatics

Heating and Cooling

Installation Distance

100 mm

Heating Performance

DIN EN 1264-2

76,00 W/m²

Cooling Performance

DIN EN 1264-5

40,00 W/m²

Heating Pipe

Ø 17 x 2,0

Installation Distance

150 mm

Heating Performance

DIN EN 1264-2

66,00 W/m²

Cooling Performance

DIN EN 1264-5

33,00 W/m²

Heating Pipe

Ø 17 x 2,0

Sustainability

Surfaces

Static

Additional equipment

Facings

Staircases, platforms, etc. need to be finished with a front cladding (facing). Where features such as free-standing borders are required, the top edges of the facing will be protected with a stair edging profile. Angles screwed to the subfloor and bracing installed in the upper area of the facing ensure a stable structure.

Expansion joints profiles

In order to take up horizontal and vertical movements in a structural and inconspicuous manner, expansion joint profiles are used in the area of the hollow floor, adapted to the application.

Electrical outlets

As all electrical installations are laid under the hollow floor, electrical connections can be placed exactly where you want them by the insallation of electrical outlets.

Cavity barriers

Three different types of cavity barriers can be possible to meet the different requirements in the hollow floor area.

- Ventilation barriers made from coated chipboard panels
- Fire protecion barriers made from solid gypsum wall blocks (min. 80 mm)
- Sound protection barriers made from foam mortar (min. 100 mm)

Air ventilation outlets

Air ventilation outlets allow the room to be air-conditioned and ventilated without creating draughts.

Various systems are available:
- Open system
Ventilation takes place directly in the cavity for installations, which is designed as a pressure floor, through the corresponding air ventilation outlets or rather through the hexagonal ventilation outlets into the room.
- Closed system
In a closed system, the air is fed through a pipe system or through cavity barriers with fixed connections to the air ventilation outlets.

Bridging profiles

Due to structural reasons bridging is required where pedestals cannot be installed. In such cases, special bridging profiles are available which are easy to install and improve at the same time dynamic and static load-bearing capacities.

Reinforcement profiles

Standard Lindner floor systems already exhibit high load-bearing capacities. Should these still not be sufficient, the system can be upgraded by reinforcement profiles. Various options are possible, from the lightest stringer which increases lateral rigidity through to a C-profile.

Coverings

Technical data

Don't hesitate to contact us!

+49 8723 20-3682 E-Mail

Combinable Systems - (10)

FLOOR and more®

Dry hollow floor

The dry hollow floor system FLOOR and more® offers stability and state-of-the-art technology. The ho...

FLOOR and more® acoustic

Dry hollow floor for acoustical adjustment

The dry hollow floor system FLOOR and more® acoustic is used for the acoustic optimisation of rooms....

FLOOR and more® arena

Dry hollow floor for tiered structures

The dry hollow floor system FLOOR and more® arena complies to all project-specific requirements to t...

FLOOR and more® CLT

Dry hollow floor on cross laminated timber ceiling

The dry hollow floor system FLOOR and more® offers stability and state-of-the-art technology. The ho...

Digital Service

Tender texts and DIN/VOB specifications

www.ausschreiben.de

Building Portfolio

Public Areas: Entrance Areas, Escape Routes

Work: Common Rooms, Facilities for Meetings, Conventions and Conferences, Stage and Studio Rooms, Office buildings, Broadcasting Rooms, Television Studios, Assembly Rooms

Education: Library Rooms, Research Rooms, Schools, School of Higher Education

Businesses, Recreation and Culture: Shopping Centres, Sales Areas, Banks, Cinemas and Theatres, Concert Halls, Museums, Places of Assembly

Healthcare: Clinics and Hospitals, Laboratories and Research Facilities

Hotels and Gastronomy: Restaurants and Canteens, Commercial Kitchens, Hotels and Resorts

Industry: Laboratories and Research Facilities

Public Institutions: Court Houses, Government Buildings

Transport: Train Stations, Airports

Residential:

Technical requirements

Fire Protection: Fire Behaviour / Building Material Class, Fire Resistance

Acoustics: Airborne Sound Reduction, Longitudinal Sound Reduction, Impact Sound Reduction

Hygiene: Cleanable by vacuuming, Wipeable, Antibacterially disinfectable, Virucide disinfectable

Design: Aluminium, Stainless Steel, Elastic, Gypsum, Glass, Wood, Laminate, Steel, Stone, Fabric

Climatic Regulation: Heating and Cooling

Corrosion Protection: Interiors, Wet Areas

Sustainability: Environmental Product Declaration

Safety Technology: Intruder Protection, Electrostatics

Statics: Walkability, Seismic Safety, Heavy-Duty Loads

Certificate

References

Our Projects worldwide

Once around the globe and back again to our home Arnstorf: With our construction projects we are represented almost everywhere! No matter whether new construction or renovation, whether interior fit-out, building envelope or insulation – our references consist of a colourful mixture full of new challenges and impressive results.