Raised Floor NORTEC
The NORTEC raised floor system offers impressive in-built properties and truly state-of-the-art technology. It is the ideal product for almost any field of application.
NORTEC floor panels give superb underfoot comfort. They are manufactured from calcium sulphate (gypsum): a non-combustible material with superlative structural and physical properties. This product also offers outstanding levels of soundproofing. As a manufacturer, we can determine the choice of raw materials used.
The Institute of Building Biology in Rosenheim recommends NORTEC as a biologically-neutral building material. Our gypsum panels are virtually emission-free.
NORTEC can be combined with many other systems, offering a great degree of flexibility. There is also a practically limitless choice of floor coverings.
- Superb underfoot comfort
- Very high loadability
- Simple taking-out and changing of single panels
- Low air leakage rate
NORTEC - Typical areas of use
- Foyer and reception areas
- IT control centres
- Training and research rooms
- Office and design areas
- Industrial and workshops
NORTEC - System data
|Panel||Fibre-reinforced calcium sulphate panel, optionally with galvanised steel sheet at underside, optionally with edge trim to protect against impact and moisture|
|Load-bearing capacity||2 kN - 5 kN|
|Resistance to earth||≥ 106 Ω|
|System weight||37 kg/m² - 71 kg/m²|
|Standard finished floor heights||28 mm - 2,000 mm|
|Panel thickness||16 mm - 44 mm|
|Pedestal spacing||600 mm x 600 mm (other pedestal base spacings system-dependent)|
|Suitable floor coverings||Elastic coverings / textile coverings / HPL / WOODline / STONEline / loose-laid tiles|
|Reaction to fire performance of the panel||A2/A1 (non-combustible)|
|Fire resistance performance||F 30, REI 30 and F 60, REI 60|
|Normalised flanking level difference Dn,f,w||48 dB - 59 dB|
|Sound reduction index Rw||62 dB|
|Normalized flanking impact sound pressure level Ln,f,w||73 dB - 47 dB|
|Reduction in impact sound pressure level ΔLw||12 dB - 36 dB|
The substructure is an important component of every system floor. The pedestals create the cavity needed to accommodate the services. Lindner metal pedestals can be adjusted to almost any height, therefore compensating for any uneveness in the subfloor.
From design to manufacture – we produce our pedestal range entirely in-house. We manufacture highly accurate pedestals for raised floors. Our many years of experience ensure high load-bearing capacity and excellent durability for all our products.
Lindner systems can be combined with one another in many ways, and supplemented with different reinforcement profiles.
Even a standard Lindner ﬂoor system offers excellent load-bearing capacity. Should this prove insufﬁcient, the system can be upgraded by reinforcement proﬁles, adjusted to the speciﬁc purpose.
Many options are available, from the lightest stringer which increases lateral rigidity through to a C-proﬁle.
Phone +49 8723 20-3682
» Contact Form