Products|Ceilings|Ceiling Surfaces|Perforations|REGULARline

REGULARline

Further Perforations

REGULARline

Further Perforations

A wide selection of further REGULARline perforations is available - you can choose between different round holes, square holes and slotted holes. Perforated metal ceilings are acoustically effective when combined with sound-absorbing inlays on the rear side.

wide selection of perforations with round holes, square holes and slotted holes
acoustically effective in combination with sound absorbing inlays

Data Sheet

© Mark Bentley Photography

REGULARlineApplication

Downloads

Categories

Brochures (1)
Data Sheet (27)
Declaration of Performance (1)

Downloads

More items

Product Information

Variants

Surfaces

Rd 0,7 - 0,5

hole: Ø 0.7 mm diagonal pitch
open area: 0.5 %
material: steel l thickness: 0.6 mm l width of perforation: 860 mm
max. panel width: 625 mm

Rg 0,7 - 1

hole: Ø 0.7 mm straight pitch
open area: 1 % (perforated over the edges)
material: steel l thickness: 0.6 mm l width of perforation: 1,340 mm
material: aluminium l thickness: 0.6 mm l width of perforation: 860 mm
material: aluminium l thickness: 0.8 mm l width of perforation: 1,340 mm
max. panel width: 625 mm

Rd 0,7 - 2

hole: Ø 0.7 mm diagonal pitch
open area: 2 % (perforated over the edges)
material: steel l thickness: 0.6 mm l width of perforation: 1,340 mm
material: aluminium l thickness: 0.6 mm l width of perforation: 860 mm
material: aluminium l thickness: 0.8 mm l width of perforation: 1,340 mm
max. panel width: 625 mm

Rg 0,7 - 4

hole: Ø 0.7 mm straight pitch
open area: 4 % (perforated over the edges)
material: steel l thickness: 0.6 mm l width of perforation: 1,535 mm
max. panel width: 625 mm

Rg 0,8 - 5

hole: Ø 0.8 mm straight pitch
open area: 5 %
material: steel l thickness: 0.7 mm l width of perforation: 1,630 mm

Rd 1,6 - 6

hole: Ø 1.6 mm diagonal pitch
open area: 6 %
material: steel l thickness: 0.6 mm l width of perforation: 860 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,630 mm

Rg 1,6 - 13

hole: Ø 1.6 mm straight pitch
open area: 13 %
material: steel l thickness: 0.6 mm l width of perforation: 860 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,600 mm

Rd 1,6 - 25

hole: Ø 1.6 mm diagonal pitch
open area: 25 %
material: steel l thickness: 0.6 mm l width of perforation: 860 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,600 mm

Rg 1,8 - 3

hole: Ø 1.8 mm straight pitch
open area: 3 %
material: steel l thickness: 0.7 mm l width of perforation: 1,310 mm

Rg 1,8 - 5

hole: Ø 1.8 mm straight pitch
open area: 5 %
material: steel l thickness: 0.6 mm l width of perforation: 1,280 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,280 mm

Rd 1,8 - 10

hole: Ø 1.8 mm diagonal pitch
open area: 10 %
material: steel l thickness: 0.6 mm l width of perforation: 1,280 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,280 mm

Rg 1,8 - 11

hole: Ø 1.8 mm straight pitch
open area: 11 %
material: steel l thickness: 0.7 mm l width of perforation: 1,310 mm

Rg 1,8 - 19

hole: Ø 1.8 mm straight pitch
open area: 19 %
material: steel l thickness: 0.6 mm l width of perforation: 1,280 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,280 mm
material: aluminium l thickness: 1.25 mm l width of perforation: 1,615 mm

Rv 1,8 - 20

hole: Ø 1.8 mm diagonal pitch
open area: 20 %
material: steel l thickness: 0.6 mm l width of perforation: 1,550 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,550 mm
material: aluminium l thickness: 0.6 mm l width of perforation: 880 mm
material: aluminium l thickness: 0.7 mm l width of perforation: 880 mm
material: aluminium l thickness: 0.8 mm l width of perforation: 880 mm

Rd 1,8 - 21

hole: Ø 1.8 mm diagonal pitch
open area: 21 %
material: steel l thickness: 0.7 mm l width of perforation: 1,310 mm

Rv 2,0 - 20

hole: Ø 2.0 mm diagonal pitch
open area: 20 %
material: steel l thickness: 0.6 mm l width of perforation: 1,250 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,250 mm
material: aluminium l thickness: 0.8 mm l width of perforation: 1,000 mm

Rg 2,3 - 11

hole: Ø 2.3 mm straight pitch
open area: 11 %
material: steel l thickness: 0.6 mm l width of perforation: 1,250 mm

Rd 2,3 - 23

hole: Ø 2.3 mm diagonal pitch
open area: 23 %
material: steel l thickness: 0.6 mm l width of perforation: 1,250 mm

Rv 2,5 - 32

hole: Ø 2.5 mm diagonal pitch
open area: 32 %
material: steel l thickness: 0.6 mm l width of perforation: 790 mm

Rg 3,0 - 15

hole: Ø 3.0 mm straight pitch
open area: 15 %
material: steel l thickness: 0.6 mm l width of perforation: 1,250 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,250 mm

Rd 3,0 - 30

hole: Ø 3.0 mm diagonal pitch
open area: 30 %
material: steel l thickness: 0.6 mm l width of perforation: 1,250 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,250 mm
material: aluminium l thickness: 2.0 mm l width of perforation: 1,520 mm

Qg 4,0 - 20

square hole: 4.0 mm straight pitch
open area: 20 %
material: steel l thickness: 0.6 mm l width of perforation: 1,600 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,600 mm

Qd 6,0 - 15

square hole: 6.0 mm diagonal pitch
open area: 15 %
material: steel l thickness: 0.6 mm l width of perforation: 1,600 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,600 mm

Qg 6,0 - 30

square hole: 6.0 mm straight pitch
open area: 30 %
material: steel l thickness: 0.6 mm l width of perforation: 1,600 mm
material: steel l thickness: 0.7 mm l width of perforation: 1,600 mm

Qg 8,0 - 44

square hole: 8.0 mm straight pitch
open area: 44 %
material: steel l thickness: 0.6 mm l width of perforation: 650 mm
material: steel l thickness: 0.7 mm l width of perforation: 650 mm

Lg 25x3

slotted round hole: 25.0 mm x 3.0 mm straight pitch
open area: 20 %
material: steel l thickness: 0.6 mm l width of perforation: 636 mm

Lge 21x4

slotted square hole: 21.0 mm x 4.0 mm straight pitch
open area: 30 %
material: steel l thickness: 0.6 mm l width of perforation: 616 mm
material: steel l thickness: 0.7 mm l width of perforation: 616 mm

Technical data

Acoustics

Fire protection

Durability

Don't hesitate to contact us!

+49 8723 20-3679 E-Mail

© www.Lindner-Group.com

Combinable Systems - (47)

LMD-B 100

Linear Post Cap Ceiling

The system LMD-B 100 features visible Post Cap profiles in linear arrangement. If necessary, partiti...

LMD-B 100 SD

Linear Post Cap Ceiling, Longitudinally Sound-Reduced

This ceiling system with visible linear Post Caps and tested longitudinal sound reduction is the per...

LMD-B 110

Post Cap Ceiling with Cross Noggins

This ceiling system with visible linear Post Caps and Cross Noggins offers you the possibility to fa...

LMD-B 147 SD

Post Cap Ceiling Concealed, Longitudinally Sound-Reduced

The special feature of this system: the Post Cap profiles are not visible – nevertheless, it is poss...

Load more

Digital Service

NBS Specifications

BIM Content

www.bimobject.com

References

Our Projects worldwide

Once around the globe and back again to our home Arnstorf: With our construction projects we are represented almost everywhere! No matter whether new construction or renovation, whether interior fit-out, building envelope or insulation – our references consist of a colourful mixture full of new challenges and impressive results.

© www.Lindner-Group.com

Kantonsspital Baden

Baden, Switzerland

© Klaus Völcker/UKR

A Patient's Home for the Leukemia Help Foundation Eastern Bavaria

Regensburg, Germany

© www.Lindner-Group.com

Tenant fit-out Hamburger Welle

Hamburg, Germany

© www.Lindner-Group.com

Ritterstraße 16-18 Berlin

Berlin, Germany

© www.Lindner-Group.com

Fit-out Arxada

Basel, Switzerland

© www.Lindner-Group.com

Police and Justice Centre Zurich

Zurich, Switzerland

© www.Lindner-Group.com

ETH Zurich research building 'BSS

Basel, Switzerland

© www.Lindner-Group.com

LSC Engineering Group

Contern, Luxembourg

More about our references