Raised Floor VENTEC

The raised floor system VENTEC is perfectly suited for the use in technical rooms, server rooms and data centres. The carrier panel consists of a welded tubular frame construction with powder coated surface. The perforation can be realized with slotted or round holes.

Panels with slotted holes are available as standard versions with free cross-sections of 15 % and 23 %. Panels with round holes are available with cross-sections of 15 %, 24 % and 38 %.

On request partially perforated or patterned versions as well as other free cross-sections are available.

Product features: 

  • Free cross-sections up to 38 %
  • Optionally round or slotted holes
  • Air flow regulations sheets on the lower side of the panel possible
  • Possiblity of combination with other Lindner raised floor panels

VENTEC - Typical areas of use

  • Training and research rooms
  • Office and design areas
  • Office or residential construction
  • Refurbishment projects
  • Projects with short construction period

VENTEC - System data

Panel Carrier panel from a welded tubular frame construction with powder coated surface
Load-bearing capacity 3 kN - 5 kN
System weight 40 kg/m² - 43 kg/m²
Standard finished floor heights 70 mm – 2,000 mm
Panel thickness 30 mm - 40 mm
Pedestal spacings 600 mm x 600 mm (other pedestal base spacings system-dependent)
Suitable floor coverings Elastic coverings / textile coverings / loose-laid tiles / coverings with perforation or suited for seepage ventilation

Fire protection

Reaction to fire performance of the panel A2, A1 (non-combustible)

Substructure

The substructure is an important component of every system floor. The pedestals create the cavity needed to accommodate the services. Lindner metal pedestals can be adjusted to almost any height, therefore compensating for any uneveness in the subfloor.

From design to manufacture – we produce our pedestal range entirely in-house. We manufacture highly accurate pedestals for raised floors. Our many years of experience ensure high load-bearing capacity and excellent durability for all our products.

Lindner systems can be combined with one another in many ways, and supplemented with different reinforcement profiles.

Reinforcement profiles

Even a standard Lindner floor system offers excellent load-bearing capacity. Should this prove insufficient, the system can be upgraded by reinforcement profiles, adjusted to the specific purpose. Many options are available, from the lightest stringer which increases lateral rigidity through to a C-profile.

System accessories

  • Electrical outlets
  • Bridging profiles
  • Transition profiles
  • Expansion joints
  • Air ventilation outlets
  • Facings
  • Cavity barriers
  • Revision openings